MICHELIN POWER PERFORMANCE CUP

Delivering race-winning pace lap after lap!

  • Warm-up
  • Performance made to last
  • Driving ease
  • Non road legal
  • Mandatory tyre warmers 
  • For 600cc motorcycles

 Warm-up

The tyre provides the grip needed from the first lap. The materials used allow the rubber to warm up quickly. It benefits from the latest technologies developed in MotoGP™.

bnf1

 Performance made to last 

The tyre delivers consistent performance, lap after lap. Consistence achieved thanks to a footprint that is uniform over the various camber phases*

bnf2

Driving ease

Treaded version of the MICHELIN Power Performance Slick, developed to suit both amateur and experienced riders and all motorbikes. The tyre is optimized for Supersport 600cc bikes riding in national and international championships.

bnf3

Recommended pressure

  • Minimum cold pressure on track(1)

          Front 2.1 BAR (30.5 PSI)

          Rear 1.3 BAR (18.9 PSI)

  • Hot pressure under tyre warmers(2)

          Front 2.3 to 2.5 BAR (33 to 36 PSI)

          Rear 1.5 to 1.7 BAR (22 to 24.7 PSI)

  • Target hot pressure (after 6 laps)

           Front 2.3 to 2.5 BAR (33 to 36 PSI)

          Rear 1.5 to 1.7 BAR (22 to 24.7 PSI)

bnf4

4 storlekar tillgängliga för MICHELIN POWER PERFORMANCE CUP

Position
Passar ditt fordon

MICHELIN POWER PERFORMANCE CUP 120/70R17 58V SOFT

Bredd

120/70R17 58V SOFT

Profil

120

Diameter

17

Belastningskapacitet

58

Hastighetskapacitet

V

Passar ditt fordon

MICHELIN POWER PERFORMANCE CUP 120/70R17 58V MEDIUM

Bredd

120/70R17 58V MEDIUM

Profil

120

Diameter

17

Belastningskapacitet

58

Hastighetskapacitet

V

Passar ditt fordon

MICHELIN POWER PERFORMANCE CUP 190/55R17 75V MEDIUM

Bredd

190/55R17 75V MEDIUM

Profil

190

Diameter

17

Belastningskapacitet

75

Hastighetskapacitet

V

Passar ditt fordon

MICHELIN POWER PERFORMANCE CUP 190/55R17 75V SOFT

Bredd

190/55R17 75V SOFT

Profil

190

Diameter

17

Belastningskapacitet

75

Hastighetskapacitet

V

Legal notices 

(1) Pressure taken with tyre and rim at ambient temperature, just before the first ride or just before installing the tyre warmers. 
(2) Michelin recommends setting the tyre warmer temperature to 90 degrees. The pressures are given for information purposes only and depend on the equipment and its correct operation.

 

* Internal study carried out on the Jerez Circuit, September 2017, Yamaha R6

Du använder en webbläsare som inte stöds
Du använder en webbläsare som inte stöds av den här webbplatsen. Detta innebär att vissa funktioner kanske inte fungerar som avsett. Detta kan orsaka avvikande beteenden när du surfar på webbplatsen. Använd eller uppgradera/installera en av följande webbläsare för att få tillgång till alla funktioner på webbplatsen.